Straighten and cut machine
Home > PRODUCTS > Straighten and cut machine
straightening and cutting machine
Product Introduction：Product introduction: No tailings, PLC control, smooth cut, high efficiency, low noise, good straightness.
Detailed Introduction
Technical Parameter
Product introduction: No tailings, PLC control, smooth cut, high efficiency, low noise, good straightness.
Widely used in manufacturers of various shaft parts: fastener industry, micro motor shaft, pneumatic piston rod, auto parts, home appliance shaft, computer fax machine shaft, timer shaft, ceramic ignition shaft, needle bearing, screwdriver, Hex tool etc. A series of wire straightening and cutting machines
| Model | WY3000 | WY3600 | WY4000 |
| Wire Diameter(mm) | Φ20-30 | Φ28-36 | Φ32-46 |
| Cut length (mm) | 45-6000 | 50-6000 | 60-6000 |
| Cutting speed(M/min) | 20-25 | 20-22 | 20-22 |
| Length error(mm) | 0.2 | 0.2 | 0.25 |
| Straightness(mm/m) | 0.03 | 0.03 | 0.03 |
| Main motor power (KW) | 75 | 80 | 100 |
| Total power (KW) | 86 | 90 | 110 |
| Remark | 1. The long material rack can be customized within an accuracy of 6M, and the cutting length error is within 0.5mm/non-accurate 9M, and the cutting length error is 2.0mm. 2. Equipped with frequency conversion stepless speed regulation PLC computer counting, fault shutdown, equipped with one-way quick cut-off hydraulic system, the maximum cut-off speed is 120-150 timesper minute. | ||
